598 Shawnee Drive
Nappanee, IN 46550
877-715-7300  * 574-773-7300
Fax 574-773-5114
Email info@decconsupply.com

Product Overview

• Stamped Concrete : Is a premixed, dry-shake, colored concrete hardener.
• Overlay : Is a stampable cementitious topping for beautifying both interior and exterior concrete surfaces
• Broom Finish : Is a trowelable or squeegee applied cementitious topping for leveling and retexturing both interior and exterior concrete surfaces.
• Spray Textures : Cementitious topping for texturing both interior and exterior concrete surfaces, applied with hopper gun and compressed air.
• CounterTop : Cementitious compound for creating concrete counter tops for both interior and exterior applications. 
• Wall Stamp : Is a lightweight trowelable cementitious overlay for texturing both interior and exterior vertical wall surfaces.
• Stain : Is not a typical stain or dye. It is made from a very mild hydrochloric acid solution, wetting agents, and metallic ions, and specially formulated pigments.
• Translucent Highlighting : Is a solvent based “antiquing” or highlighting secondary color for stamp overlay or stamped concrete.
• Highlighting Color : Reactive acid stain that imparts multi-hued, variegated color for cementitious finishes through the chemical reaction between the metallic ions of the stain & the alkalinity of the concrete
• Integral Color : Concrete colors are pure, synthetic, iron oxide pigments containing no fillers that will affect the performance of the concrete mix design.
• Sealer / Anti-Slip : A wide range of sealers from clear to pigmented and anti-slip additives.
• Surface Delay : Is a transparent blue, soapy odor, non-hazardous, concentrated, film-forming solution that is designed to reduce evaporation without altering concrete surface characteristics.
• SCR : Is a penetrating concentrated surface renovator that quickly dissolves lime deposits, mortar, scale, rust, algae, stains, and mineral deposits.
• Surface Preparation : Gelled acid developed to profile the surface of concrete in preparation for the application of an overlay system.
• Crack Treatment : Either a 2 part expoxy or a 2 part urethane to treat creaks before overlaying.
• Wood Floor Treatment System :  Waterproof membrane with a fiber mesh to treat wood floors before overlaying.
• Feather Finish : Is an extremely versatile and durable cementitious topping for both interior and exterior concrete surfaces.
• Patch & Blend : Is made up of Deep Level and Flash Patch to level up joints before overlaying.
• HydroBlock : Is a clear, odorless, non-toxic penetrating solution that creates a gel that permanently prevents the passage of free water through concrete.
• Glue Remover : Is a safe non-flammable, water-based glue and mastic remover that effectively softens and removes most types of carpet adhesives and similar glue deposits.
• Enviro-Strip : Is a non-flammable, water-based stripper for acrylic coating or deeply embedded greasy soil removal on concrete floors.
• Tools : We offer a wide range of tools for your decorative concrete needs.